DA-G2.Pro MOST25 | Network Preamp w/DSP

The DA-G2 Pro installs in place of the MOST 25 multichannel amplifier in compatible vehicles.

Any Automatic Noise Cancelling systems are automatically disabled (if present), as is any "fake exhaust" note injected into the sound signal. 

The DA-G2 Pro provides pure, clean stereo audio - it eliminates all OEM crossover filters, fixed and dynamic EQ, phase manipulation, compression, etc. It is both a high-quality digital-to-analog converter and an audiophile analog preamp - the OEM analog signal path is eliminated. In home-audio terms, the DA-G2 Pro  is a digital-to-analog converter as well as a high-end preamp. For more on networked preamps, see this Knowledgebase article. 

NOTE: If the vehicle does not have a compatible MOST 25 sound package, the vehicle may be able to be recoded to support a MOST 25 amplifier (and hence a network preamp). In this case, the DA-G2 can be added to the  vehicle MOST loop with the addition of some cabling. The installer takes all responsibility for successful recoding of vehicles without a MOST 25 amplifier as original equipmentl 

NOTE: When using the Toslink output with left and right stereo channels, the front/rear fade controls are inoperative, and there is no control for subwoofer level. 

INPUT
Digital Input from the vehicle infotainment MOST 25 network 

OUTPUT
Ten analog RCA channels (3.6V RMS)

Frequency Response (analog or digital) 20 Hz-24 kHz

Signal-to-Noise Ratio (analog): 112dB

THD+N @-1dB FS: -107dB FS

32-bit Blackfin DSP w/crossovers, delay, EQ, and polarity inversion

POWER SUPPLY
Current Consumption:
Standby: <3mA
Operational: 350 mA nominal
Operational Voltage: 8V – 22V DC
Remote Turn On Capacity: 12V @ 500mA

OTHER

Dimensions 110mm x 80mm x 30mm

Weight 200g

Country of Origin Australia

For a list of vehicles covered, please click here . 

• DA-G2 MOST 25 Pro module
• Power/ground/remote harness
• MOST 25 fiber-optic cabling

* DA-G2 Dipswitch Settings
* MOST Product Installation Guide
* DA-G2 User Manual
* DA Manual - Audi specific
* DA Manual - Mercedes Benz specific
* DA Manual - BMW specific
* BMW-MINI Coding Procedures

You may cancel your order without penalty prior to the product shipping.

Products cancelled or refused after the product has shipped will incur shipping and handling charges as well as a 20% restocking fee.

We will accept returns of eligible items within 30 days of your receipt. Exchanges are also accepted during the 30-day window, and may occur at Nav-TV’s discretion during the warranty period. Products returned within the first 30 days after purchase ,and are subject to a 20% restocking fee. Products must be new, unused and in their original packaging to qualify for a refund.

Please visit the Nav-TV or Zen audio website to start a return or exchange. The order number provided in your confirmation email is required in order to process the return.  

If you believe you have received a defective product, please contact Technical Support to initiate an exchange. Technical Support will work with you to determine next steps. Upon our receipt of the product and confirmation of defect as determined by our inspection, we will provide an exchange unit. Please see our Warranty policy here.

Returned product must be in new and unused condition. The order number provided in your confirmation email is required in order to process the return. Any shipping and handling fees will not be refunded.  You will be responsible for return shipping costs. Upon our receipt of the product in unused/resalable condition as determined by our inspection, we will issue a refund to the credit method used to make the purchase.

The privacy policy can be viewed here.